Menus/Screens/Options

image4

Menus/Screens/Options

MENUS / SCREENS / OPTIONS
----------------------------------------------

Needle Sweep
With this mod, by making contact makes the staging or test needle, is a very striking mod.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 1
4 - Enable Bit 0
Easier still:
1 - Applications
2 - Test-Gauge Needle sweep
3 - On

Lap timer in Maxidot
With this mod, you will add a timer in the FIS.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 1
4 - Enable Bit 3
Another way:
1 - Applications
2 - Lap timer
3 - Select the desired

Maxidot refuel quantity
With this mod, you will add the function of liters you have to refuel.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 10
4 - Enable Bit 4
Easier still:
1 - Applications
2 - Refuel quantity in dashboard
3 - On
It shows the liters of 5 in 5. Full Deposit = 45 liters, full tank shows three stripes.

Disable seat belt warning
With this mod, you can disable the audible and visual warning belts.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 1
4 - Disable Bit 1
Another way :
1 - Adaptation
2 - Select - Disable belt warning
3 - Select one of the two options:
- No (default)
- If
Another way :
1 - Applications
2 - Seatbelt warning
3 - Select the desired

Maxidot oil temperature
With this mod, you add the oil temperature in the FIS
1 - Box Module 17- instruments- Code (25327)
2 - Extended Coding
3 - Byte 10
4 - Enable Bit 1
Another way :
1 - Adaptation
2 - Select - Display of oil temperature
3 - Select one of the two options:
- Yes (default)
- Do not
Another way:
1 - Applications
2 - oil temperature in Dis
3 - Select the desired

Enable Compass (NAV menu) in Maxidot
With this mod, you will add the compassand NAV menu in the Maxidot.
1 - Box Module 17- instruments- Code (25327)
2 - Extended Coding
3 - Byte 10
4 - Enable Bit 6
Another way :
1 - Coding extended (Text mode)
2 - Navigation / Compass - Switch to SI
3 - Indicator compass --- Lower position (Change what you want)

Digital odometers in Maxidot
With this mod, you add the digital speedometer in the FIS (You have to select it on the screen of Settings)
1 - Module 17 - Code Box instruments- (25327)
3 - Adaptation
4 - Select - Digital Tachometer
5 - Select one of three options:
- Indication
- No indication
- Not available

Correction of fuel consumption in Maxidot
With this mod, you can calibrate consumption if you see that do not fit what you think.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select- Correc.del indic.de consumption / combustion scope - Options: (100%)
4 - Change value. Default 100%
5 - The adjustment allows increments of 1%, maximum and minimum values ​​are 85 (%) and 115 (%).

Change Home Screen
With this mod, we change the screen that starts the infotainment.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding (Text mode)
3 - Select - Initial Screen
4 - Select one of eight options
- Option 1 (default)
- Rest

DRL control from the CAR menu
With this mod, we activate a new option in Settings-lights where we can activate or deactivate the DRL.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Daytime Running Light
4 - Tagfahrlicht Aktivierung oder durch BAP bedienfolge moeglich
5 - Change value to On
Another way :
1 - Applications
2 - DRL settings in head unit
3 - Select On

Change logo radio (vRS, L&K, Scout, Greenline)
With this mod, you can change the initial logo.
1 - Module 5F - Information Electronics 1. Code (20103)
2 - Adaptation
3 - Byte 18 Screenings
Value in 0 - Skoda Default
Value in 1 - Skoda vRS
Value in 2 - Skoda Scout
Value in 3 – Skoda Laurin & Klement
Value in 4 – Skoda Greenline

Control interior lighting by zones from the CAR Menu
With this mod, we activate new options in Settings-lights where we can control the lights by area.
1 - Module 09 - Electronic. Code (31347)
2 - Extended Code (Bytes Mode)
3 - Byte 17
4 - Enable Bit 3 (Control ambient light)
5 - Enable Bit 2 (All Areas)
6 - Enable Bit 1 (light intensity door)

Rear wiper on screen
With this mod, we activate the comfort mode back clean
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - wiper
4 - Menuesteuerung konfortwischen HW
5 - Change value to On

Engineer mode or Green Menu
With this mod, we activate the engineer mode. Vallais be careful not to roll.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Select CHANGE SERVICE
3 - development mode.
4 - Adaptation
5 - Development Mode
6 - Change to On.
- Restart Infotainment
- Hold the Menu button and hold until you exit the menu updates and not let go until you exit the menu engineer.

Change system language
With this mod, we can change the system language.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Language
4 - Select language

Menu Display Compass - OFF ROAD WITH AND WITHOUT NAV MIB2 ONLY 
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu compass display (ON)
5 - Search submenu - Menu display compass over threshold (ON)
6 - Select - Car Function List Bap Gen 2
7 - Search submenu - Compass 0x15 (ON)
8 - Search submenu - 0x15 Compass msgbus (data bus comfort)
9 - Byte 24 Navigation System
10 - Change value to On.
This mod does not allow all functions without NAV.
Logically altitude and compass does not display data.
Also reports a fault in the module 5F saying that environmental data missing
(Only reports to do analysis with OBDeleven, nothing comes on screen)
With NAV everything works 100%
If you want to show the angle of rotation of the wheels on this menu you have to make the Slope Angle mod below.

Menu Display Angle of Slope - angle of rotation of the wheels 
With this modification you can add new functionality to Mod OFFROAD Display Menu.
This mod by itself does not work, you must have activated the OFFROAD menu.
This will show graphically the angle of rotation of the wheels to turn the wheel.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu display angle of slope (ON)
5 - Search submenu - Menu display angle of slope over threshold (ON)
6 - Select - Car Function List Bap Gen 2
7 - Search submenu - Angle of stope 0x24 (ON)
8 - Search submenu - 0x24 Angle of stope msg bus (data bus comfort)

Menu Display Driving School - Driving Menu
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu display driving school (ON)
5 - Search submenu - Menu display driving school over threshold (ON)
6 - Select - Car List Function CAN Gen 2
7 - Search submenu - Driving school (ON)
8 - Search submenu - Driving school msgbus (data bus comfort)

Displays temperature
With this mod we can change temperature degrees Celsius to Fahrenheit
1 - Module 17 - Code Box instruments- (25327)
3 - Extended Coding
4 - Temperature
5 - Select one of the two options:
- Celsius degrees
- Fahrenheit degrees

Display engine cylinder deactivation on CoD cars
With this mod we can display in FIS when cylinders are deactivated in cars with engines Cylinder on Demand.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Cylinder Deactivation
4 - Change to Display

Add menu to Mirrors and Wipers that allows you to have an auto wipe of the rear wiper when you select Reverse

Coding
Select Control Unit 09 (Central Electronics)
Select Adapations
Select Rear Window Wiper
Select Menuesteuerung KomfortwischenHW: and change value to Active.

Go to main settings menu and go to bottom and select factory reset.
Reset all or just the mirrors and Wipers and the menu will now appear.