Mirrors/Windows/ Ceiling/Wipers/ Power bootlid coding

image15

Mirrors/Windows/ Ceiling/Wipers/ Power bootlid coding

MIRRORS / WINDOWS / CEILING / WIPERS / POWER BOOTLID
--------------------------------------

Enable boot closing from the key-fob and interior button on Estate models with the powered tailgate

Controller 6D - Trunk Electrics

16 - Security Access - enter 12345

10 - Adaptations

(4)-Activation using rear lid opening button in remote key-Tap function for closing - set to active

(4)-Activation using rear lid remote unlocking switch-Tap function for closing - set to active

The beeps can be disabled as below - just set the ones you want to 'not active' if you want to customise it and have some beeps - fairly self-explanatory.

Volume of acoustic warning – set to not activated.

Enable boot lid locking delay 

This will enable the delay on locking the trunk lid when opened from the remote when the car is locked. So, if you shut the trunk and then realise you have left the keys in the boot it doesn't lock straight away, you have about 27 seconds to open it again before it locks.

Controller 09

16 - Security Access - enter 31347

10 - Adaptations

Change (26)-Access control-Freigabenachlauf Heck nach Einzeloeffnungueber HDF-Funktaster to active

Disabling comfort windows opening from the door lock
With this mod we can deactivate that they go down and that they raise the windows with the key in the door lock.
It is very interesting because it has been proven that in some cases with any key of the group can be lowered and open windows by turning it in the lock.
In no case with a key other than the car opens, but we have also detected that if it can be closed.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Access control 2 - Options (Various values)
4 ------ Schliesszylinder komfort oeffnen - Options (Activated - Inactive)
5 ------ Schliesszylinder komfort schliessen- Options (Activated - Inactive)

Semi-automatic folding and unfolding mirrors
With this mod, holding down the button on the remote can fold or unfold the mirrors to lock or unlock the car.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - Funk modus spiegelanklppung
5 - Change value via remote control Convenience key opeation
Hold the button to fold or unfold

Lower rear view mirror right when reversing (Memory does not work without memory seats)
With this mod, the reverse gear selector and mirrors in R, the lower right mirror to the stored position.
1 - Module 52 - passenger door Electronics
2 - Extended coding (Mode Bytes)
3 - Byte 04
4 - Enable Bits 2 and 3
5 - Coding extended (Text mode)
6 - Select - Position memory With rear gear
7 - Change value to On
8 - Module 09 - Electronic. Code (31347)
9 - Adaptation
10 - Select - Control Access 2
11 - Sub - MenuesteuerungSpiegelabsenkung (On)
12 - Sub - Spiegelabsenkung beiRueckwaertsfahrt (On)
Easier still: This should work with 5Q4 door controller upgrade, but is as yet untested.
1 - Applications
2 - Mirror dip
3 - Activate
To store the reverse position, put the selector R. Mete mirrors reverse. A position that fits you well come. Remove the reverse and wait a few seconds.
You have it memorized.
Change the selector to 0 and the mirror should return to the normal running position.

Folding mirrors with a touch control
With this mod, mirrors will fold without having to be continually pressing the button on the remote.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - Funk modus spiegelaklappung
5 - Change value By command via remote control look key

Folding mirrors. On-Screen Activation
With this mod, the windows are raised and the mirrors are folded without having to be continuously pressing the button of the remote.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Access control 2
4 - Submenu - Menuesteuerung funk spiegelanklappen - Options (Inactive - Activated)
5 - Change value to On
The Settings main screen is activated.

Opening and closing the windows (One touch)
With this modification will get the opening and closing windows in comfort mode.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - Comfort opening
5 - Change value to Active
6 - Sub - Menuesteuerung konfortbedienungeinstellbar
7 - Change value Adjustable
8 - Sub - Funk konfort oeffnen
9 - Change value to Active
10 - Sub - SAD konfort oeffnen
11 - Change value to Active
12 - Sub - Comfort closing
13 - Change value to Active
14 - Sub - Funk konfort schliessen
15 - Change value to Active
16 - Sub - SAD konfort schliessen
17 - Change value to Active

Close windows to detect rain(2013-14 ONLY)
If you leave the car with the windows down and starts to rain, the car automatically closes the windows
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Access Control 2
4 - Sub - ein aus Regenschliessen
6 - Change value to Active
7 - Sub - Menuesteuerung regenschliessen
8 - Change value to Active
9 - Sub - Regenschliessen art
10 - Change value to Permanent
11 - extended Coding (Bytes Mode)
12 - Byte 0
13 - Enable Bits 1 and 2

Please note you have to have the correct RLFS sensor in your window for this to work.

Activate windows with running even opening the doors so they do not stop
With this mod, the windows work even with the doors open.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Functions assist light
4 - Select - Control Access 2
5 - Sub - FH Freigabenachlauf beitueroeffnen abbrechen
6 - Change value to On

One touch opening of the sunroof
By default, pressing the roof opening, it opens to a fixed position. With this mod the roof is fully opened without having to be pressed until it reaches the end.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - SAD Richtung komfortoeffnen
5 - Change value to Open

Front wiper stops in Service Mode when opening the bonnet
With this mod, each time you open the hood, the clean ones will be placed in service mode. Very useful to wash the moon or change the clean. In normal position when opening them they give in the bonnet.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Windshield wipers
4 - Sub-menu - Wischer abparken beioeffnen der motorhaube

5 - Change value to On

Please note the coding works fine but a number of users have advised that nothing changed.

Activate front teardrop wipe

1 - Controller 09 - Central Electronics

2 - 07 – Coding

3 - Select Slave Module WWS371

4 - Long Coding Helper

5 - Enable Byte 0 Bit 3

6 - Enable Byte 2 Bit 5

Front wiper self park after ignition is switched off

1 - Controller 09 - Central Electronics

2 - 07 – Coding

3 - Select Slave Module WWS371

4 - Long Coding Helper

5 - Disable Byte 1 Bit 4

Permanently disable comfort rear wiper system
If you do not like that every time you back up the rear wiper is started with this mod you can disable it.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - wiper
4 - Sub heck -Traenenwischen
5 - Change value on off

Enable rear teardrop wipe

1 - Controller 09 - Central Electronics

2 - 16 - Security Access - enter 31347

3 - 10 - Adaptations

4 - Change the channels listed below for rear teardrop wipe

5 - Rear Window Wiper-TraenenwischenHeck - set to active

Rear wiper setting in the menu
This mod adds more function in the menu of the clean. You can choose to or not activate the automatic rear clean.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - wiper
4 - Menuesteuerung konfortwischen HW
5 - Change value to On

Adjust / Turn Off Headlight washers

Select Control unit: 09 Central Electrics

Security Access 31347

Select Adaptation

Type Windshield Wiper

Select SRA Verzoegerungszeit

Set to 2000 ms or whatever value you want. 2500 ms is 2.5 seconds and so on.

Turn off Front Windscreen wipers when bonnet is open

Select Control unit: 09 Central Electrics

Select Adaptation

Select Windshield wiper
Select Wischer Stopp bei Oeffnen der Motorhaube: 
Change value to active